About The Battery; Charge The Battery - Honeywell Dolphin CT50 User Manual

About the Battery

The CT50 uses a rechargeable 3.8 V Li-ion battery as its main power source. The
battery has a 15.5 watt-hour capacity. Several factors determine the life of your
battery, such as display brightness, display timeout, input device, extreme tem-
perature, and your usage.
Honeywell recommends that you keep the battery charged at all times to prevent
data loss. When you change the battery, the computer automatically goes into a
power-off state.
Contact your local sales representative for replacement batteries.
Caution: The battery used in this device may present a fire or chemical
Caution: We recommend the use of Honeywell Li-ion battery packs. The
Warning: The battery pack must not be removed or installed while in a
Avertissement: La batterie ne doit pas être retirée ni installée dans un

Charge the Battery

Dolphin CT50 Non-Incendive
Warning: Batteries must only be changed or charged in an area known to
Avertissement: Risque d'explosion - Les batteries doivent uniquement
All Other Versions
The Healthcare version of the CT50 uses battery Model CT50-BTSC, part number
318-055-008.
All other versions of the Dolphin CT50 use battery Model CT50-BTSC, part number
318-055-005.
4
burn hazard if it is mistreated. Do not disassemble it, heat it
above 60 °C (140°F), or incinerate it. Dispose of used batteries
promptly. Keep away from children.
use of any non-Honeywell battery may result in damage not
covered by the warranty.
potentially hazardous location.
site potentiellement dangereux.
be non-hazardous. Use ONLY Honeywell CT50 battery Model
318-055-009.
être remplacées ou rechargées dans un endroit non dangereux.
Utilisez UNIQUEMENT Honeywell CT50 batterie modèle
318-055-009.
Dolphin CT50 with Windows 10 IoT User Guide