Charge Before Use; Change The Battery - Honeywell Dolphin CT50 User Manual

Charge Before Use

Make sure you fully charge the battery before you use your computer. You can
charge the battery before or after you install it in the computer. It takes about
6 hours for the battery to fully charge in any of the accessories.
To charge only the battery:
•
To charge the battery installed in the CT50:
•

Change the Battery

If your battery power is low, you need to either charge the battery in the computer,
or replace it with a charged battery.
Caution: Make sure you completely power off the computer before
1. Save your files and close any open applications.
2. Press and hold the Power button. The following screen appears:
3. Swipe down toward the bottom of the screen to power off the CT50. The word
Dolphin CT50 with Windows 10 IoT User Guide
Insert the battery into a Quad Battery Charger or the battery well of an
eHomeBase.
Insert the computer with the battery installed into an eHomeBase, ChargeBase,
NetBase, Quad Battery Charger, USB Adapter, or Vehicle Power Adapter.
changing the battery. Failure to completely power off the
computer can result in the computer crashing and the
possibility of having to reinstall the firmware.
"Goodbye" appears on the screen as the computer powers off.
5