Disable Wi-Fi Notifications; Connect To An Ethernet Network - Honeywell Dolphin CT50 User Manual

Chapter 6 — Configure the Computer

Connect to an Ethernet Network

64
1 Open the Settings app and tap Wi-Fi. The list of available Wi-Fi
networks appears.
2 Tap and hold the name of a connected network and then tap Modify
network.
3 Tap Advanced options.
4 If the network has no proxy settings, tap None in the Proxy Settings
list, and then tap Manual in that list.
5 Enter the proxy settings for the network.
6 Tap Save.

Disable Wi-Fi Notifications

By default, when Wi-Fi is enabled, you receive notifications in the Status
bar when the computer discovers a wireless network. You can disable
these notifications.
1 Open the Settings app and tap Wi-Fi.
2 Tap and then tap Advanced. The Advanced Wi-Fi menu appears.
3 Tap the Network notification slider to disable notifications.
To connect the computer to an Ethernet network, you need an Ethernet
dock.
1 Make sure the dock is connected to your Ethernet network.
2 Place the computer in the dock.
3 Start the Settings app and make sure Ethernet is enabled (Ethernet
is enabled by default).
To enable Ethernet, slide the Ethernet switch on. When the switch
turns blue, Ethernet is enabled.
4 Tap Ethernet Settings. The Ethernet list shows the name of the
current Ethernet connection. By default, the computer assumes a
DHCP connection, and that your network has assigned an IP
address automatically. If DHCP is working, the Ethernet dock should
indicate that communication with the network is occurring.
5 (Optional) To assign a static IP address, tap the connection name (for
example, eth0). The IP settings dialog box appears.
a Tap DHCP and then select Static from the list.
b Enter the required network information and then tap Save.
Dolphin CT50 Mobile Computer User Guide