Reset The Computer To Factory Default State - Honeywell Dolphin CT50 User Manual

Hide thumbs Also See for Dolphin CT50:

Table of Contents

1. Tap All Apps > Settings > System > About.

2. Scroll to the bottom of the screen and tap Reset your phone.

3. When the warning appears, select the check boxes you want to apply and tap Yes.

4. When prompted again, tap Yes. You should see "Goodbye" appear on the screen

5. Press the Power button to turn on the CT50. You will need to set up your computer

Reset the Computer to Factory Default State

If the computer is unresponsive and all other recovery methods have failed, you prob-

ably need to reset the computer to the factory default state.

When you reset the computer to the factory default state, all personal content is

erased and all factory default settings are restored on the computer. The reset

discards any account information you may have added, including your Microsoft

account information. Only installed Microsoft OTA updates persist after a reset.

Caution: Resetting the computer to the factory default state erases the

1. Press and hold the Volume Down and Power buttons simultaneously until a large

2. Press the following buttons in this order:

Note: Once the computer resets, the language selection screen appears. You need to set up the

computer again.Dolphin CT50 with Windows 10 IoT User Guide

Dolphin CT50 with Windows 10 IoT User Guide

and then a set of gears with a status bar below until the computer turns off.

again.

memory on the computer, including all applications and data files

with the exception of the information found in any removable

storage. You must re-implement any custom provisioning after

resetting the computer to the factory default state.

exclamation point appears on the screen. This process can take a while, but con-

tinue to hold down the two buttons until you see the exclamation point.

•

Volume Up

•

Volume Down

•

Power

•

Volume Down

Table of Contents