Change How Data Packets Are Routed; How To Restart The Computer - Honeywell Dolphin CT50 User Manual

Change How Data Packets are Routed

The Route app allows you to view and edit the rules that govern how packets des-
tined for various subnets are routed. These rules tell the computer which gateways,
on a given subnet, may be used to route packets to hosts on other subnets. You can
add, delete, clear, or print a route. This procedure explains how to add a route.
1. Tap All Apps > Route.
2. Type the range of IP addresses to which this rule will apply in the Destination
3. Type the Gateway.
4. (Optional) Type the Metric.
5. (Optional) Type the Interface.
6. Tap Execute. The system verifies your results and the Output screen lets you

How to Restart the Computer

If the computer or an application locks up, or if the computer does not respond
when you press the Power button, you may need to restart the computer.
The computer uses the configuration currently saved in flash memory during the
boot process. Try these methods, in order, to restart the computer:
•
•
•
Dolphin CT50 with Windows 10 IoT User Guide
and Netmask fields.
know if your entry was added successfully.
Restart: Restarts the computer and goes through the initialization process.
Clean boot: Completely erases the computer memory, including all applications
and data files, except those found in any removable storage.
Reset to factory settings: Returns the computer to the factory default state.
53