Scan Settings
Use the scan settings to determine how the scanner acts when you scan a bar
code. You can control whether it vibrates, makes a sound, and how it scans.
Scan Settings and Descriptions
Settings
Vibrate
Sound
Scan Mode
Automatic Interval
Symbology Settings
The Symbology Settings define the bar code symbologies the scanner will decode
with the ScanDemo App.
•
•
For a complete list of all available symbologies, see Appendix A,
beginning on page 57.
Profile Settings for ScanDemoW10
The built-in Point of Service (POS) profiles are applied by the ScanDemoW10 App
using the Microsoft POS application program interface (API), ClaimedBarcodeS-
canner.SetActiveProfileAsync. This API sets the active profile on the CT50 bar
code scanner. The profile strings defined by:\Documents\Profile\HoneywellDe-
coderSettingsv2.exm file are returned to the app using BarcodeScanner.GetSup-
portedProfiles; it gets the list of profiles supported by the bar code scanner.
Dolphin CT50 with Windows 10 IoT User Guide
Descriptions
Turns on or off the vibrate on a good read.
Turns on or off the beeps to indicate a good read.
There are three options for scan mode:
Normal: Normal mode requires you to press Scan or one of the Scan
buttons between each scan.
Automatic: Automatic mode activates the scanner for continuous
scanning without requiring you to touch Scan on the screen each time.
Continuous: Continuous mode activates the scanner only when you
touch and hold one of the Scan buttons.
Adjusts the automatic interval from 0 to 30 seconds between each scan.
Touch the toggle box next to a symbology to enable or disable it.
Swipe up or down to scroll through the list of available symbologies.
Specifications,
27