Table of Contents
Advertisement
Network communication
Connecting to Wi-Fi networks
ScanPal EDA50 Enterprise Hybrid Device User Guide
Users can connect the terminal to wireless and wired networks. Users can get
the terminal connected via the following ways:
•
802.11 radios
•
Bluetooth
•
USB
When communicating through wireless networks, ScanPal EDA50 transfer data
through 802.11 radios. Before connecting to a Wi-Fi network, users need to
know the Security Protocol of the network and the certificates it required.
Usually, 802.11 radio is diabled by default.
1.
Enter Settings, slide the WLAN switch to enable it.
2.
When the WLAN switch turns blue, tapping the WLAN bar will display the
detected network list.
6. Terminal configurations
57
Advertisement
Table of Contents
