Where To Go Next; Additional References - Cisco 6000 Series Configuration Manual

Configuring Ethernet OAM
ethernet oam profile Profile_1
snmp-server traps ethernet oam events

Where to Go Next

When you have configured an Ethernet interface, you can configure individual VLAN subinterfaces on that
Ethernet interface.
For information about IPv6 see the Implementing Access Lists and Prefix Lists module in the IP Addresses
and Services Configuration Guide .

Additional References

The following sections provide references related to implementing Gigabit,10-Gigabit, and Fast Ethernet
interfaces.
Related Documents
Related Topic
Cisco IOS XR master command reference
Cisco IOS XR interface configuration commands
Information about user groups and task IDs
Standards
Standards
IEEE 802.1ag
ITU-T Y.1731
MEF 16
MIBs
MIBs
IEEE8021-CFM-MIB
Interface and Hardware Component Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
Title
Connectivity Fault Management
OAM Functions and Mechansims for Ethernet Based Networks
Metro Ethernet Forum, Technical Specification MEF 16, Ethernet Local Management
Interface (E-LMI), January 2006
MIBs Link
To locate and download MIBs for selected platforms using Cisco IOS XR Software,
use the Cisco MIB Locator found at the following URL:
http://cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
Document Title
Cisco IOS XR Master Commands List
Cisco IOS XR Interface and Hardware Component
Command Reference
Cisco IOS XR Interface and Hardware Component
Command Reference
Where to Go Next
61