Configuring The Module Using The Icim; To Configure Parameters Using The Icim - Cisco Prisma II Installation Manual

Chapter 3 Operation using ICIM

Configuring the Module using the ICIM

To Configure Parameters using the ICIM

You can use the ICIM to configure the parameters of this module.
1 From the MAIN menu, press the
fields.
2 Press the
the
3 Press the
4 Press the
5 Press the
6 To configure the module, press the
7 Press the
until you find the parameter of interest.
8 Press the
9 Press the
selected control.
10 Press the
96
key to address the Shelf number. Then press the
key to scroll to the number of the desired shelf.
key. The Slot field is highlighted.
key or the
key. The MODULE menu appears on the ICIM LCD.
key or the
key to select the highlighted control.
key or the
key to save the changes and return to the MAIN menu.
key to highlight the Shelf and Slot
key to scroll to the number of the desired slot.
key.
key to scroll through the configurable controls
key to activate or change the value of the
key or