A
Appx auto letter
Appendix A
Module Parameter
Descriptions
Introduction
This appendix provides manufacturing data, monitored parameters,
configurable parameters, and alarms for the Prisma II Quad EDR
Receiver module and its associated node. The examples shown in the
tables are for guidance only.
CAUTION:
The warranty may be voided and the equipment damaged if you
operate the equipment above the specified temperature limits
(131° F/55° C for post-amplifiers, 122° F/50° C for receivers, 149° F/65° C
for other products). Specification temperature limits are measured
in the air stream at the fan tray inlet and may be higher than room
ambient temperature.
In This Appendix
Receiver Parameters for GS7000 Nodes........................................... 142
Receiver Parameters for Compact Nodes ........................................ 151
Receiver Parameters for GainMaker Nodes .................................... 160
141