Operation Using Icim - Cisco Prisma II Installation Manual

3 Chapter 3

Operation using ICIM

Introduction
The procedures in this chapter apply if you are using the Prisma II
ICIM2 front-panel interface to configure and operate the module. For
information on using CLI commands or the ICIM Web Interface to
configure and operate the module, see the Configuration Guide for
your system release.
Scope of This Chapter
Included in this chapter are descriptions of the ICIM2 front-panel
keyboard and liquid crystal display (LCD), and detailed procedures
on how to use front-panel menus to configure the module.
Note: You must use CLI commands or the ICIM Web Interface to
configure and operate the module when using the ICIM2-XD. For
details, see the Configuration Guide for your system release.
75