Saving The Configuration Using The Icim; To Save The Current Configuration; Configuration Complete - Cisco Prisma II Installation Manual

Saving the Configuration using the ICIM

To Save the Current Configuration

1 After you have changed a parameter or entered data, press the
the changes and return to the MAIN menu. The ICIM will report "SUCCESS" if
the changes were accepted.
2 If you do not save your changes for two minutes, or if you press the
keys at the same time, changes are aborted and the display returns to the MAIN
menu.

Configuration Complete

If no alarms are indicated after using the ICIM to configure this module to your
system specifications, no further action is necessary. The module operates without
further input. Alarms, changes in operating parameters, electrical power
fluctuations, or changes in system design may be cause for additional action.

Saving the Configuration using the ICIM

key to save
105