Cisco ONS 15310-MA Troubleshooting Manual page 76

Alarm Procedures
2.7.102 INHSWPR
The Inhibit Switch To Protect Request on Equipment condition occurs on traffic cards when the ability
to switch to protect has been disabled. If the port is part of a 1+1/LMSP protection scheme, traffic
remains locked onto the working system.
Clear the INHSWPR Condition
If the condition is raised against a 1+1/LMSP port, complete the
Step 1
Command" procedure on page
If the condition does not clear, log into the Cisco Technical Support Website at
Step 2
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC
(1-800-553-2447).
2.7.103 INHSWWKG
The Inhibit Switch To Working Request on Equipment condition occurs on ONS 15310-MA SDH traffic
cards when the ability to switch to working has been disabled. If the card is part of a 1+1/LMSP
protection scheme, traffic remains locked onto the protect system.
If the condition is raised against a 1+1/LMSP port, complete the
Step 1
Command" procedure on page
If the condition does not clear, log into the Cisco Technical Support Website at
Step 2
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC
(1-800-553-2447).
2.7.104 INTRUSION-PSWD
The Security Intrusion Incorrect Password condition occurs after a Superuser attempts a settable number
of unsuccessful logins, a login with an expired password, or an invalid password. The alarmed user is
locked out of the system, and INTRUSION-PSWD condition is raised. This condition is only shown in
Superuser login sessions, not in login sessions for lower-level users. The INTRUSION-PSWD condition
is automatically cleared when a settable lockout timeout expires, or it can be manually cleared in CTC
by the Superuser if lockout is permanent.
Cisco ONS 15310-MA SDH Troubleshooting Guide, Release 9.0
2-76
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SDH Logical Object: EQPT
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SDH Logical Object: EQPT
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SDH Logical Object: NE
2-147.
2-147.
Chapter 2 Alarm Troubleshooting
"Initiate a 1+1/LMSP Manual Switch
"Initiate a 1+1/LMSP Manual Switch
78-18663-01