Honeywell KHF 1050 System Installation Manual page 60

CHARACTERISTIC
AGC
SSB and AME:
Distortion
SSB:
Receiver Intermodulation:
AME
Audio Output Level
Receiver Audio/Sidetone:
SELCAL Audio:
External Modem Audio:
Audio Frequency Response
Receiver Audio/Sidetone:
SELCAL:
External Modem:
Spurious Response:
Squelch:
EXCITER
Output Impedance:
Power Output
with microphone input
Audio Frequency Response
SSB Voice:
SSB Data:
(Note 3)
AM Voice:
Revison 2
N
KHF 1050 SYSTEM INSTALLATION MANUAL
10 dB (max) change in audio level with RF level
changes between 10 uV and 100,000 uV
5% (max)
25 dB (min) below the desired tone
< 5% (typical); 12% (max) with 85% modulation
7.75 Vrms +/- 2 dB (100 mW across 600 ohms)
adjustable down to 0.24 Vrms
0.775 Vrms +/- 2 dB (0 dBm across 600 ohms)
adjustable from 0.24 Vrms to 2.45 Vrms
0.775 VRMS +/- 2 dB (0 dBm across 600 ohms)
Adjustable from 0.24 Vrms to 2.45 Vrms
6 dB (max) from 350 Hz to 2500 Hz
3 dB (max) from 300 Hz to 1500 Hz
4 dB (max) from 300 Hz to 2500 Hz
60 dB (min)
Syllabic, signal/noise and signal level squelches
available
50 ohms (nominal)
0 dBm +/- 5 dBm
+/- 6 dB (max) from 350 Hz to 2500 Hz
+/- 4 dB (max) from 300 Hz to 2500 Hz referenced
to 1 KHz
+/- 6 dB (max) from 350 Hz to 2500 Hz
DESCRIPTION
23-10-09
Page 34
Apr/2006