Table of Contents
Advertisement
7.B.(2)(b)
Check that all functions are properly strapped to reflect the aircraft system
configuration Paragraph
7.B.(2)(c)
Double-check continuity of all power pins.
7.B.(3)
Visual Inspection
Perform the visual inspection/check procedure
Procedure"
7.B.(4)
Post-Installation Test
7.B.(4)(a)
Perform the System Performance Check in the
ISOLATION"
7.B.(4)(b)
With the aircraft outside any hangar and at least 50 feet (15 m) away from
metal buildings, establish communications with another HF station. It is
important that the frequencies selected be appropriate for the distance
between the aircraft and the other station (See
Signal Propagation Distance"
preferably on several different operating frequencies as propagation may
permit.
Revison 2
N
KHF 1050 SYSTEM INSTALLATION MANUAL
"5.D. Strapping Options"
).
Section.
("Table 2007 - Visual Inspection
"TESTING AND FAULT
"Table 2008 - Typical HF
). Request a signal and audio quality report,
23-10-09
.
Page 2048
Apr/2006
Hide quick links:
Advertisement
Table of Contents
