Mode Settings; Functions Operation - AEG AS-IC01-4000 Installation Instructions Manual

37

5.4.8 Mode settings

The default mode of series grid-tied solar inverter is "independent"; however, if the current of solar modules are joined
into the inverter as figure 26 shows, it is necessary to switch the mode to "parallel".
Solar modules

5.5 Functions operation

After powering up the inverter by DC input for the first time or after restoring factory settings, the LCD screen will
show the following message:
and a list of countries will be displayed (as in Figure 28).
PD201709 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.1-17 EN
DC convergence (lighting) box
FU
SPD
Figure 26: 'Parallel' input mode
Only when the DC voltage is high enough, the LCD display is working, and the AC switch
is off, it is possible to modify the inverter DC input mode via the LCD screen and keypad.
S O L A R I N V E R T E R
I n i t i a l i n g ... ... W a i t i n g
> > > > > > >
Figure 27: Initialization
Inverter
QF
Track A Track B
Line splitter
37