Monitoring Solutions - AEG AS-IC01-4000 Installation Instructions Manual

41
Interface
AEG WiFi200 is released from factory in AP mode. It can be connected with the 485 communication interface of inverters
and can be operated over computer or mobile software.

6.3.2 Monitoring solutions

AEG WiFi200 communication modules features three monitoring solutions according to specific requirements:
1. Direct connection. Allows short-distance site control
2. Router-LAN. Allows remote LAN monitoring.
3. Router-Internet. Allows remote access internet control.
1. Direct connection
Direct connection is suitable for short-distance monitoring. The connection scheme in sketched in the above
figure 34. To set up direct monitoring, hardware and software devices such as the AEG AS-IC01 and AS-IC01-2
series solar inverters, AEG WiFi200 communication module, computers enabled for WiFi signal reception, and
AEG InverterControl solar monitoring software (AEG InverterControl App) are needed. AEG WiFi200 operates
in AP mode which is also the default mode of the module. The monitoring device can view the inverter through
wireless mode.
PD201709 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.1-17 EN
Parameters function
the inverter
8. Working temperature: -20~70°C
9. Working humidity:10%-90%RH (no condensation)
10. Storage temperature: -40-80 °C
11. Storage humidity: 5%-90%RH (no condensation)
12. Other frequency: 20MHz, 40MHz and automatic
Table 23: AEG WiFi200 features
AP mode
Figure 33: Direct connection
WiFi
AEG InverterControl App
WiFi
41