43
5.4.8 Mode settings
The default mode of series grid-tied solar inverter is "independent"; however, if the current of solar modules are joined
into the inverter as figure 26 shows, it is necessary to switch the mode to "parallel".
Solar modules
5.5 Choice of grid standard
After powering up the inverter by DC input for the first time or after restoring factory settings, a list of countries will
show as in Figure 16L
Press the " " or " " button to select the country, and press the ENT button to complete the setting.
PD201809 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.2-18 EN
DC convergence (lighting) box
FU
SPD
Figure 26: 'Parallel' input mode
Only when the DC voltage is high enough, the LCD display is working, and the AC switch
is off, it is possible to modify the inverter DC input mode via the LCD screen and keypad.
C o u n t r y :
U n s e t
Germany
G r e e c e
U K
D e n m a r k
A u s t r a l i a
H o l l a n d
Figure 16L: Country list
QF
Track A
C o u n t r y :
U n s e t
G r e e c e
C h i n a
D e n m a r k
T h a i l a n d
H o l l a n d
Other
Inverter
Track B
Line splitter
43