Operation Panel; Lcd Display - AEG AS-IC01-4000 Installation Instructions Manual

26
Inverter state
Manual turn off

5.2 Operation panel

There are 4 buttons on the panel:
1. "ESC", exit and return ;
2. " ", back to the front page and data increasing;
3. " "，to the next page and data decreasing;
4.
The inverter can be turned on and off by pressing the buttons: press "ESC" and "ENT" (about 3 seconds) at the same
time; this activates the quick start-up and stop function.

5.3 LCD display

Operation panel
PD201709 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.1-17 EN
LED indicators
Run
Warn
Fault
Run
Warn
Fault
Please refer to chapter 5 and 7 for detailed fault information and troubleshooting.
"ENT", enter.
Red indicator is on, others are off :
Current-leakage or unqualified output power energy of the
inverter (E007, E010, E014, E017, E018 or E020). De-couple the
inverter from the system before maintenance.
All indicators are on:
Stop after the communication or panel command.
Table 15: Inverter states
LCD screen
Figure 15: Operation panel
Description
LED indicators
Operation panel
26