Table of Contents
Advertisement
15
3.2 Before installation
3.2.1 Installation tools
Detailed list of the tools required for installation:
No.
Installation tool
1
Marking pen
2
Electrodrill
3
Hammer
4
Monkey wrench
5
Allen driver
6
Straight screwdriver
7
Megger
8
Multimeter
9
Electric iron
3.2.2 Installation place
Select the installation place based on the following considerations:
1.
Height from ground level should be enough to ensure that display and status LEDs are easy to read.
2.
Select a well ventilated place sheltered from direct sun radiation and rain.
3.
Allow sufficient space around the inverter to enable easy installation and removal from the mounting
surface. Please refer to Figure 8.
4. The environment temperature should range between -25°C~60°C.
5.
The installation position should be such that interference from other electrical devices is avoided.
6. The inverter needs to be installed on a firm and sturdy surface, such as a wall, or metal brackets.
7.
The installation surface should be perpendicular to the horizontal line. Please refer to Figure 9
PD201709 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.1-17 EN
Instruction
Mark the installation hole
Drill in the bracket or wall
Hammer on the expansion bolts
Fix the installation bracket
Fasten the screws, remove and install AC wiring box
For AC wiring
Measuring insulation performance and impedance
Check the circuit and AC and DC voltage
Weld communications cable
Table 7: Required installation tools
15
Hide quick links:
Advertisement
Table of Contents
