Monitoring Communication; Standard Communication - AEG AS-IC01-4000 Installation Instructions Manual

39

6. Monitoring communication

This section describes the communication connection of inverter and the inverter's monitoring system (computers,
mobile devices etc). The standard communication mode of AEG AS-IC01 and AS-IC01-2 series of grid-tied solar
inverters is RS485. The RS485 port can communicate with computers and mobile devices.
The monitoring system is sketched in figure 31.

6.1 Standard communication

WiFi is the standard communication mode for the AEG AS-IC01 and AS-IC01-2.
Pins on inverter
Pin on inverter
1
2
3
4
PD201709 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.1-17 EN
Figure 31: Inverter monitoring system
RS485
1 4
2 3
1 4
2 3
EXT
Figure 32 (left): RS485 pin on inverter
Definition
+5VDC
A (RS485+)
B (RS485-)
GND
Table 22: Pins on inverter detail
4 3 2 1
(right) Communicator connector
39