Communications; Order Codes; Specifications - GE D90 Plus Instruction Manual

ORDER CODES

Communications

Order codes
NOTE:
D90P – * – * – * – * – ** – * – * – * – * – * – * – * – * – * – * – * – ** – *
Base D90P | | | |
Front panel A | | |
interface
H | | |
Language E | |
Protection S |
E |
A |
Automation S
E
Communications
Metering
Digital fault recorder
Equipment manager
Reserved
Power supply
Inter-relay communications
Communications
Input/output modules
AC modules

Specifications

NOTE:
24
Plus
The D90 incorporates powerful communications capabilities required for the
demanding applications anticipated in future substations. The communications module is
dedicated to processing the IEC 61850, DNP 3.0, and IEC 60870-5-104 protocols. This
module provides redundant Ethernet ports each with 10/100Base-TX and 100Base-FX
connectors.
Modbus RTU and DNP3.0 are also available as default protocols through the RS485 port or
the CPU Ethernet ports (slot D).
Plus
The D90 is available as a 19-inch rack horizontal mount or reduced-size (¾) vertical unit
and consists of a number of optional and required modules. Each of these modules can be
supplied in a number of configurations specified at the time of ordering. The information
required to completely specify the system is provided in the following table.
Order codes are subject to change without notice. See the ordering page at
www.gegridsolutions.com/multilin/order.htm
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
01 | | | | | |
02 | | | | | |
03 | | | | | |
04 | | | | | |
S | | | | |
P | | | | |
L | | | | |
U | | | | |
S | | | |
D | | | |
S | | |
C | | |
X | |
H |
X
B
C
D
X
A
Specifications are subject to change without notice.
for the latest ordering options.
Figure 13: Order codes
D90Plus Line Distance Protection System
| | | | | | | Base unit
| | | | | | | Annunciator
| | | | | | | Annunciator and HMI
| | | | | | | English
| | | | | | | Three-pole distance protection
| | | | | | | Three-pole distance protection and protection FlexLogic™
Single-pole/three-pole sub-cycle distance protection, series
| | | | | | |
compensation, and protection FlexLogic™
| | | | | | | Breaker control and synchrocheck
| | | | | | | Breaker control, synchrocheck, and automation controller
| | | | | | | Modbus TCP/IP, DNP 3.0 serial, and serial Modbus
| | | | | | | Modbus TCP/IP and IEC 61850
| | | | | | | Modbus TCP/IP, IEC 61850, and DNP 3.0 TCP/IP
| | | | | | | Modbus TCP/IP, IEC 61850, and IEC 60870-5-104
| | | | | | | Basic metering
| | | | | | | Basic metering and synchrophasors
| | | | | | | Basic metering and data logger
| | | | | | | Basic metering, synchrophasors, and data logger
| | | | | | | Transient recorder and sequence of events recorder
| | | | | | | Transient recorder, sequence of events recorder, and disturbance detector
| | | | | | | Circuit breaker, communication statistics, and battery monitor
| | | | | | | Circuit breaker, comms. statistics, battery monitor, and breaker monitor
| | | | | | | Reserved
| | | | | | | High (88 to 275 V AC; 80 to 300 V DC)
| | | | | | | Reserved
| | | | | | | G.703, 64/128 kbps, two channels
| | | | | | | RS422, 64/128 kpbs, two channels, two clock inputs
| | | | | | | 850 nm, 64/128 kbps, ST multi-mode laser, two channels with DDMI
| | | | | | No communications module
| | | | | | Dual ST fiber and copper module
X X X X | X No input/output modules
A A A A | A 8 inputs, 4 form-A outputs with voltage and current monitoring
B B B B | B 8 inputs, 4 solid-state outputs with voltage and current monitoring
C C C C | C 8 inputs, 4 form-A outputs
D D D D | D 4 inputs, 8 form-A outputs
E E E E | E 23 inputs
F F F F | F 12 form-A outputs
01 5VT and 7CT (5 amp current)
02 5VT and 7CT (1 amp current)
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 2: PRODUCT DESCRIPTION
http://