Ethernet Actual Values - GE D90 Plus Instruction Manual

NETWORK SETTINGS

Ethernet actual values

100
Select the Actual Values > Communications > Communication menu item to open the
communications actual values window.
The following actual values are related to the Ethernet communications feature.
Port 1 Ethernet Actual Mode, Port 2 Ethernet Actual Mode, Port 3 Ethernet Actual Mode
Range: 10/100 BASE-TX, 10/100 BASE-FX
This actual value indicates the Ethernet hardware type on each of the three ports.
Port 1 Ethernet Duplex, Port 2 Ethernet Duplex, Port 3 Ethernet Duplex
Range: Full Duplex, Half Duplex
This actual value indicates the Ethernet duplex mode on each of the three ports.
Port 1 Ethernet Speed, Port 2 Ethernet Speed, Port 3 Ethernet Speed
Range: 10 Mbps, 100 Mbps
This actual value indicates the network speed on each of the three Ethernet ports.
Port 1 Ethernet Link Status, Port 2 Ethernet Link Status, Port 3 Ethernet Link Status
Range: Online, Offline
This actual value indicates the connection status on each of the three Ethernet ports.
IEC 60870-5-104 Available
Range: No, Yes
This actual value indicates if the IEC 60870-5-104 protocol is enabled on the Ethernet
ports.
IEC 61850 Available
Range: No, Yes
This actual value indicates if the IEC 61850 protocol in enabled on the Ethernet ports.
Figure 80: Ethernet actual values
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: COMMUNICATIONS