Network Filtering - GE D90 Plus Instruction Manual

Line distance protection system

Hide thumbs Also See for D90 Plus:

Table of Contents

CHAPTER 6: COMMUNICATIONS

Network filtering

LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

Figure 78: HTTP configuration settings

The following settings are available.

HTTP TCP Port Number

Range: 1 to 65535 in steps of 1

This setting specifies the TCP port number for the embedded web server. This setting will

take affect once the D90

Web Server Function

Range: Disabled, Enabled

Default: Disabled

This setting enables and disabled the web server feature.

Select the Settings > Communications > Network > Filtering menu item to open the

network filtering configuration window.

Figure 79: Network filtering configuration settings

The following settings are available.

Port 1 Bandwidth Limitation

Range: Disabled, Enabled

Default: Disabled

This setting is used to enable IP protocol bandwidth limiting on Ethernet port 1. The

COMM HIGH TRAFFIC self-test message is issued when the D90

bandwidth usage. This is a minor self-test error that does not interfere with protection

functionality.

Port 2 and 3 Bandwidth Limitation

Range: Disabled, Enabled

Default: Disabled

This setting is used to enable IP protocol bandwidth limiting on Ethernet ports 2 and 3.

The COMM HIGH TRAFFIC self-test message is issued when the D90

IP bandwidth usage. This is a minor self-test error that does not interfere with protection

functionality. IP bandwidth limiting of Ethernet ports 2 and 3 does not affect GOOSE

is rebooted.

NETWORK SETTINGS

is actively limiting IP

is actively limiting