Initialize The Hba Settings - Cisco C880 M4 Configuration Manual

Initialize the HBA Settings

An HBA that has just been shipped from the factory has initialized settings and does not require the steps listed
here. Perform these steps to restore the default adapter settings.
1.
Figure 82.
2.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Select Set Emulex Adapter to Default Settings and then press the Enter key (Figure 82).
Selecting Set Emulex Adapter to Default Settings
The Set Emulex Adapter to Default Settings screen appears. Select Set Adapter Defaults and then press
the Enter key (Figure 83).
Page 79 of 146