Cisco C880 M4 Configuration Manual page 141

Before the change, all internal SAP HANA traffic goes over the access LAN (eth2).
server01:/> vi /hana/shared/ANA/global/hdb/custom/config/global.ini
[communication]
listeninterface = .internal
#listeninterface = .global
#listeninterface = .local
#listeninterface = 192.168.220.0/24
[internal_hostname_resolution]
192.168.220.101 = server01
192.168.220.102 = server02
192.168.220.103 = server03
192.168.220.104 = server04
server01:/ > sapcontrol -nr 42 -function StartSystem HDB
04.10.2013 12:14:01
StartSystem
OK
server01:/ > hdbnsutil –reconfig –hostnameResolution=internal
For more information, see:
●
http://help.sap.com/saphelp_hanaplatform/helpdata/en/32/c22f81e8c14268a4e5de01cd033e8f/content.htm
●
http://help.sap.com/saphelp_hanaplatform/helpdata/en/0c/6738ab85c64da1aed0fa91c25ed47c/content.htm
linux1:/ > sapcontrol -nr 42 -function GetSystemInstanceList
04.10.2013 12:20:21
GetSystemInstanceList
OK
hostname, instanceNr, httpPort, httpsPort, startPriority, features, dispstatus
linux2, 42, 54213, 0, 0.3, HDB, GREEN
linux4, 42, 54213, 0, 0.3, HDB, GREEN
linux1, 42, 54213, 0, 0.3, HDB, GREEN
linux3, 42, 54213, 0, 0.3, HDB, GREEN
linux1:/ > exit
linux1:~ # netstat -ia
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP
eth0 9000 0
eth1 1500 0 505653
eth2 1500 03158299
eth3 1500 0
linux1:~ #
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
20242 0 0
0 0
0 3
0 0 0
0 20171 0
0 1902027 0
0 41251411 0
0 0 0
0
0
0
0
Page 141 of 146