Sap Hana Hardware Configuration Check Tool Preparation; Os Validation; Storage Test - Cisco C880 M4 Configuration Manual

After the change, all internal SAP HANA traffic goes over the server LAN (eth7).

SAP HANA Hardware Configuration Check Tool Preparation

To prepare the necessary parameter files, you need to know the specific storage settings for the NetApp FAS8040
with cluster data ONTAP to archive the KPIs.
You should download the latest SAP HANA Hardware Configuration Check Tool (HWCCT) from the SAP
marketplace.
After parsing the test, persist the settings in the database.
These files show the necessary test parameters.

OS Validation

{
}

Storage Test

Note:
checked and validated by the SAP HANA TDI storage vendor.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
"report_id": "ntap_evalos",
"use_hdb": false,
"blades": [
"cishana01"
],
"tests": [
{
"package": "LandscapeTest",
"test_timeout": 0,
"id": 1,
"config": {},
"class": "EvalOs"
}
]
The values presented for the data and log tests (async...) + (max_pa...) are storage specific and must be
Page 142 of 146