Cisco C880 M4 Configuration Manual page 85

Set a Static Link Speed
With an EFI BIOS, configure the following settings that correspond to the connection link speed (4, 8, or 16 Gbps).
Note:
not be recognized.
1.
Figure 90.
2.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Do not set Auto negotiate - Default. First, set the fixed link speed. Otherwise, the connected device will
Select Force Link Speed <Auto negotiate – Default> and then press the Enter key (Figure 90).
Static Link Speed Setting (1)
Select the link speed that corresponds to the connection environment (connected Fibre Channel switch or
SAN storage unit) and then press the Enter key (Figure 91).
Page 85 of 146