Cisco C880 M4 Configuration Manual page 125
With sap hana tailored datacenter integration
Hide thumbs
Also See for C880 M4:
- Service manual (132 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
Example
/etc/sysconfig/network #
ifcfg-eth0
BOOTPROTO='none'
MTU='9000'
NAME='vNIC'
REMOTE_IPADDR=''
STARTMODE='off'
UNIQUE='rBUF.GtN+arZDK79'
USERCONTROL='no'
_nm_name='bus-pci-0000:00:0c.0'
ifcfg-eth1
BOOTPROTO='none'
MTU='9000'
NAME='vNIC'
REMOTE_IPADDR=''
STARTMODE='off'
UNIQUE='rBUF.FgrwMRwr45'
USERCONTROL='no'
_nm_name='bus-pci-0000:00:0d.0'
ifcfg-bond0
BOOTPROTO='static'
BROADCAST='172.16.32.255'
IPADDR='172.16.32.10'
MTU='9000'
NETMASK='255.255.255.0'
NETWORK='172.16.32.0'
REMOTE_IPADDR=''
STARTMODE='onboot'
BONDING_MASTER="yes"
BONDING_MODULE_OPTS="mode=1 miimon=100"
BONDING_SLAVE0='bus-pci-0000:00:0c.0'
BONDING_SLAVE1='bus-pci-0000:00:0d.0'
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 125 of 146
Advertisement
Table of Contents
