Set The Boot Device - Cisco C880 M4 Configuration Manual
With sap hana tailored datacenter integration
Hide thumbs
Also See for C880 M4:
- Service manual (132 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
5.
Figure 124. Saving Emulex LightPulse BIOS Settings
Set the Boot Device
Now set the boot device. Note that the settings for the 8-Gbps (12002) and the 16-Gbps (16002) devices are
identical.
1.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Press the Esc key again. Press Y to reboot the system and save your changes (Figure 124).
Select a connected boot device from the Fibre Channel port and then press the Enter key (Figure 125).
Page 110 of 146
Advertisement
Table of Contents
