Initial Setup For Thor Vm1; Hardware Setup; Software; Languages And Fonts - Honeywell Thor VM1 User Manual

If you ordered additional accessories for the Thor VM1, verify they are also included with the order. Keep the original packaging
material in the event the Thor VM1 should need to be returned for service. For details, see
11-1).

Initial Setup for Thor VM1

This page lists a quick outline of the steps you might take when setting up a new Thor VM1. More instruction for each step is
listed later in this guide.
Contact Technical Assistance

Hardware Setup

1. Install RAM Mount
2. Place Thor VM1 in the Dock
3. Connect Cables (page 4-13) for any peripherals.
4. Connect Power (page 4-14).
5. Secure all cables in
6. Press the Power Switch
7. Press the Power Button

Software

Languages and Fonts

The Thor VM1 may be shipped with an English only operating system (OS). Contact
for the availability of OS files for other languages. See
information. The language installed is identified on the Software tab of the

First Boot

When a new Thor VM1 starts up a EULA (End User License Agreement) may be displayed on the touch screen. It
remains on the screen until the Accept or Decline button is tapped with a stylus.
Tap the Accept button to accept the EULA terms and the Thor VM1 continues the startup process. The EULA is not
presented to the user again.
Tap the Decline button to decline the EULA and the Thor VM1 reboots. It will continue to reboot until the Accept but-
ton is tapped with the stylus.
Note: The EULA will be presented after any operating system upgrade or re-installation, including language-specific
operating systems.

Software Setup

Hardware setup should be completed before starting software setup.
1. If prompted, perform touch screen
2. Set Date / Time
3. Set Power (page 5-84) scheme timers.
4. Adjust Speaker Volume
5. Pair Bluetooth
6. Set Wireless client parameters using the
2 - 2
(page 11-1) if you need additional help.
(page 4-4) or Install U Bracket Mount
(page 4-2).
Strain Relief Cable Clamps
(page 3-6) on the dock to the on position.
(page 3-6) on the Thor VM1.
Calibration
(page 5-56).
(page 2-6).
(page 5-29) devices
(page 4-10) to the vehicle.
(page 4-13).
Thor VM1 OS Upgrade
(page 5-90).
Summit Client Utility (page 8-1).
Product Service and Repair
Technical Assistance
(page 5-13) for OS update installation
About (page 5-17) control panel.
(page
(page 11-1)