4.5.2 Network View
Table 4-4
Tab
History
Circuits
Provisioning
Inventory
Maintenance
4.5.2 Network View
Network view allows you to view and manage ONS 15600 SDHs and ONS 15454 SDHs that have DCC
connections to the node that you logged into, and any login node groups you have selected
Cisco ONS 15600 SDH Reference Manual, Release 9.0
4-10
Node View Tabs and Subtabs (continued)
Description
Provides a history of node alarms including
date, type, and severity of each alarm. The
Session subtab displays alarms and events for
the current session. The Shelf subtab displays
alarms and events retrieved from a fixed-size
log on the node.
Allows you to create, delete, edit, and reroute
circuits.
Allows you to provision the ONS 15600 SDH
node.
Provides inventory information (part number,
serial number, Common Language Equipment
Identification [CLEI] codes) for cards installed
in the node. Allows you to delete and reset
cards, and change card service state. For more
information on card service states, see
Appendix B, "Administrative and Service
States."
Allows you to perform maintenance tasks for
the node.
Chapter 4 Cisco Transport Controller Operation
Subtabs
Session, Node
Circuits, Rolls
General, Network, OSI, MS-SPRing,
Protection, Security, SNMP, Comm
Channels, Timing, Alarm Profiles,
Alarm Extenders, Defaults
—
Database, Routing Table, OSI,
MS-SPRing, Protection, Software,
Diagnostic, Timing, Audit, Test
Access, Alarm Extenders, Preferred
Copy
(Figure
4-4).
78-18400-01