Threshold Defaults; Defaults By Card; Stm64-4 Card Default Settings; Table C-1 Stm64-4 Card Default Settings - Cisco ONS 15600 Reference Manual

Appendix C Network Element Defaults
C.2.2 Threshold Defaults
Threshold default settings define the default cumulative values (thresholds) beyond which a threshold
crossing alert (TCA) will be raised, making it possible to monitor the network and detect errors early.
Card threshold default settings are provided as follows:
•
•
Threshold defaults are defined for near end and/or far end, at 15-minute and one-day intervals.
Thresholds are further broken down by type, such as Multiplex Section, Regeneration Section, VC3, or
VC4 for performance monitoring (PM) thresholds, and TCA (warning) or Alarm for physical thresholds.
PM threshold types define the layer to which the threshold applies. Physical threshold types define the
level of response expected when the threshold is crossed.
Note For full descriptions of the thresholds you can set for each card, see
Monitoring."
For additional information regarding PM parameter threshold defaults as defined by Telcordia
Note
specifications, refer to Telcordia GR-820-CORE and GR-253-CORE.
C.2.3 Defaults by Card
In the tables that follow, card defaults are defined by the default name, its factory-configured value, and
the domain of allowable values that you can assign to it.
Some default values, such as certain thresholds, are interdependent. Before changing a value, review the
Note
domain for that default and any other related defaults for potential dependencies.
C.2.3.1 STM64-4 Card Default Settings
Table C-1
default settings.
Table C-1

STM64-4 Card Default Settings

Default Name
STM64_4.config.line.AINSSoakTime
STM64_4.config.line.AlsMode
STM64_4.config.line.AlsRecoveryPulseDuration
78-18400-01
PM thresholds—(STM-N, STM64-4-DWDM, and ASAP cards) Can be expressed in counts or
seconds; includes line and SDH thresholds.
Physical Layer thresholds—(STM-N, STM64-4-DWDM, and ASAP cards) Expressed in
percentages; includes optics thresholds.
lists the OC192/STM64 SR/SH 4 Port 1310 and OC192/STM64 LR/LH 4 Port 1550 card
Default Value Default Domain
08:00 (hours:mins) 00:00, 00:15, 00:30 .. 48:00
Disabled Disabled, Auto Restart, Manual
Restart, Manual Restart for Test
2.0 (seconds) 2.0, 2.1, 2.2 .. 100.0 when AlsMode
Disabled, Auto Restart, Manual
Restart; 80.0, 80.1, 80.2 .. 100.0 when
AlsMode Manual Restart for Test
Cisco ONS 15600 SDH Reference Manual, Release 9.0
C.2.2 Threshold Defaults
Chapter 12, "Performance
C-3