Administrative States - Cisco ONS 15600 Reference Manual

B.2 Administrative States
Table B-2
Secondary State
automaticInService
disabled
failed
loopback
mismatchOfEquipment An improper card is installed, a cross-connect card does not support an
maintenance
softwareDownload
unassigned
notInstalled
B.2 Administrative States
Administrative states are used to manage service states. Administrative states consist of a PST and an
SST.
definitions.
A change in the administrative state of an entity does not change the service state of supporting or
Note
supported entities.
Table B-3
Administrative State (PST,SST) Definition
Unlocked
Unlocked,automaticInservice
Cisco ONS 15600 SDH Reference Manual, Release 9.0
B-2
ONS 15600 SDH Secondary States
Definition
The entity is delayed before transitioning to the Unlocked-enabled service
state. The transition to the Unlocked-enabled state depends on the correction
of conditions, or on a soak timer. Alarm reporting is suppressed, but traffic
is carried. Raised fault conditions, whether or not their alarms are reported,
can be retrieved on the CTC Conditions tab or by using the TL1
RTRV-COND command.
The entity was manually removed from service and does not provide its
provisioned functions. All services are disrupted; the entity is unable to carry
traffic.
Note
The entity has a raised alarm or condition.
The entity is in loopback mode.
installed card, or an incompatible backplane is installed. For example, an
installed card is not compatible with the card preprovisioning or the slot.
This SST applies only to cards.
The entity has been manually removed from service for a maintenance
activity but still performs its provisioned functions. Alarm reporting is
suppressed, but traffic is carried. Raised fault conditions, whether or not
their alarms are reported, can be retrieved on the CTC Conditions tab or by
using the TL1 RTRV-COND command.
The card is involved in a software download. This SST applies only to cards.
The card is not provisioned in the database. This SST applies only to cards.
The card is not physically present (that is, an empty slot). This SST applies
only to cards.
Table B-3 lists the administrative states supported by the ONS 15600 SDH. See
ONS 15600 SDH Administrative States
STM-N ports and connections in the disabled state continue to send
an Alarm Indication Signal Line (AIS-L).
Puts the entity in service.
Puts the entity in automatic in-service.
Appendix B Administrative and Service States
Table B-2 for SST
78-18400-01