Chapter 7 Circuits and Tunnels
State—Allows you to edit cross-connect service states.
•
Merge—Allows you to merge aligned circuits. For more information, see the
•
Circuits" section on page
Using the Export command from the File menu, you can export data from the SNCP Selectors,
SNCP Switch Counts, State, and Merge tabs in HTML, comma-separated values (CSV), or tab-separated
values (TSV) format.
The Show Detailed Map check box in the Edit Circuit window updates the graphical view of the circuit
to show more detailed routing information in the map area, such as:
The circuit direction (unidirectional or bidirectional)
•
The node names
•
The slot and port numbers
•
The circuit source and drop
•
The pane area shows:
The circuit name, type, and size
•
•
The protection type (SNCP, unprotected, MS-SPRing, 1+1) and routing preferences such as fully
protected path
Open Shortest Path First (OSPF) area IDs
•
For MS-SPRings, the detailed map shows the number of MS-SPRing fibers and the MS-SPRing ring ID.
For SNCPs, the map shows the active and standby paths from circuit source to destination, and it also
shows the working and protect paths. Selectors appear as pentagons on the detailed circuit map.
Alarms and states can also be viewed on the circuit map, including:
Alarm states of nodes on the circuit route
•
Number of alarms on each node organized by severity
•
Port service states on the circuit route
•
Alarm state/color of most severe alarm on port
•
Loopbacks
•
•
Path trace states
Path selector states
•
By default, the working path is indicated by a green, bidirectional arrow, and the protect path is indicated
by a purple, bidirectional arrow. Source and destination ports are shown as circles with an S and D,
respectively. Port states are indicated by colors, shown in
Table 7-4
Port Color
Green
Gray
Violet
Blue (Cyan)
78-18400-01
7-24.
Port State Color Indicators
Service State
Unlocked-enabled
Locked-enabled,disabled
Unlocked-disabled,automaticInService
Locked-enabled,maintenance
7.2.5 Circuit Information in the Edit Circuit Window
Table
7-4.
Cisco ONS 15600 SDH Reference Manual, Release 9.0
"7.14 Merged
7-9