Table 2-21 Sfp Compatibility - Cisco ONS 15600 Reference Manual

Chapter 2 Card Reference
Use only SFPs certified for use in Cisco Optical Networking Systems. The qualified Cisco SFP
Caution
pluggable module's top assembly numbers (TANs) are provided in
Table 2-21 SFP Compatibility
Card
ASAP 4PIO only
(ONS 15600 SONET/SDH)
To determine the line rates supported by each SFP/XFP, see the
on page
SFPs are integrated fiber optic transceivers that provide high-speed serial links from a port or slot to the
network. Various latching mechanisms can be used on the SFP/XFP modules. There is no correlation
between the type of latch and the model type (such as SX or LX/LH) or technology type (such as Gigabit
Ethernet). See the label on the SFP/XFP for technology type and model. One type of latch available is a
Mylar tab as shown in
and a third type of latch is a bail clasp
SFP dimensions are:
•
•
•
SFP temperature ranges for are:
•
•
•
78-18400-01
Compatible SFP
(Cisco Product ID)
ONS-SE-2G-L2
ONS-SE-Z1
ONS-SI-622-L2
ONS-SI-155-L2
ONS-SC-2G-30.3= through
ONS-SC-2G-60.6=
ONS-SI-2G-S1
ONS-SI-2G-L2
ONS-SI-2G-I1
A-12.
Figure
Height 0.03 in. (8.5 mm)
Width 0.53 in. (13.4 mm)
Depth 2.22 in. (56.5 mm)
COM—Commercial operating temperature range: 23 to 158 degrees Fahrenheit (–5 to 70 degrees
Celsius)
EXT—Extended operating temperature range: 23 to185 degrees Fahrenheit (–5 to 85 degrees
Celsius)
IND—Industrial operating temperature range: –40 to 185 degrees Fahrenheit (–40 to 85 degrees
Celsius)
Cisco Top Assembly Number (TAN)
10-2013-01
10-1971-02
10-1936-02
10-1937-02
10-2155-02 through
10-2186-02
10-1992-02
10-1990-02
10-1993-02
2-13, a second type of latch available is an actuator/button
(Figure 2-15).
Cisco ONS 15600 SDH Reference Manual, Release 9.0
2.10 SFP/XFP Modules
Table 2-21.
"A.3 SFP/XFP Specifications" section
(Figure 2-14),
2-27