Asap Specifications; Table A-9 Asap Card Specifications - Cisco ONS 15600 Reference Manual

Sdh
Hide thumbs Also See for ONS 15600:
Table of Contents

Advertisement

Appendix A Hardware Specifications
A.2.7 ASAP Specifications
Table A-9
Table A-9
Specification Type
Carrier Card (CC)
4PIO Pluggable I/O
card
1PIO Pluggable I/O
card
Payloads
SFP support
XFP support
Connectors
Power
Operating temperature
Operating humidity
Dimensions
Compliance
78-18400-01
shows the ASAP card specifications.
ASAP Card Specifications
Description
Contains slots for four pluggable ASAP I/O cards, which can be used to
provide a variety of optical line interfaces. The CC provides 4 electrical
VC4-16c or Gigabit Ethernet signals to each ASAP I/O card (for 16 total)
and 16 redundant electrical VC4-16c matrix interfaces to the backplane. For
SDH interfaces, the CC card provides pointer processing and overhead
extraction/insertion.
The ASAP 4PIO module is a four-port multirate optical interface card. It has
four slots for Small Form-factor Pluggable (SFP) optics. The four ports can
be provisioned on a per-port basis as STM-1, STM-4, STM-16, or
Gigabit Ethernet interfaces.
The ASAP 1PIO module is a single-port single-rate optical interface card. It
has one slot for XFP optics. The port can be provisioned for one STM-64
interface.
Nonconcatenated and/or concatenated payloads at VC3, VC4, VC4-2c,
VC4-3c, VC4-4c, VC4-8c, VC4-16c, and VC4-64c are supported. For
Gigabit Ethernet interfaces, Layer 1 Ethernet transport is also implemented.
ONS-SE-Z1: Supports STM-1 SR-1, STM-4 SR-1, STM-16 IR-1 or GE LX
ONS-SI-155-L2: Supports STM-1 LR-2
ONS-SI-622-L2: Supports STM-4 LR-2
ONS-SE-2G-L2: Supports STM-16 LR-2
ONS-SI-2G-S1: Supports STM-16, LR-2
ONS-XC-10G-S1: Supports STM-64 SR-1
ONS-XC-10G-L2: Supports STM-64 LR-2
Up to 16 SFP connectors (4 per 4PIO module) or 4 XFP connectors (1 per
1PIO module), at front edge of card
130 W to 180 W (maximum)
23 to 131 degrees Fahrenheit (–5 to +55 degrees Celsius)
5 to 95 percent, noncondensing
Height: 16.50 in. (419 mm)
Width: 1.50 in. (38 mm)
Depth: 18.31 in. (465 mm)
Card weight: approximately 6 pound = 2.72155422 kilograms
Telcordia GR-253
When installed in a system, ONS 15600 SDH cards comply with these safety
standards: UL 60950, CSA C22.2 No. 950, EN 60950, IEC 60950
Eye safety compliance: Class 1 (21 CFR 1040.10 and 1040.11) and Class 1
(IEC 60825) laser products
Cisco ONS 15600 SDH Reference Manual, Release 9.0
A.2.7 ASAP Specifications
A-11

Advertisement

Table of Contents
loading

Table of Contents