Checking The Battery And Backlight - GE Moisture monitor series 3 Programming Manual

Checking the Battery and
Backlight
Programming with PanaView
If your MMS-3 has the battery option, you can use PanaView to check
on the battery status and backlight settings. To check on the battery
from PanaView:
1. From the "New Meter Browser" option, click on the desired
communications port and meter.
2. From the network tree, double-click on "Battery/Backlight." The
"Battery/Backlight Status" window appears, as shown in
Figure 4-11 below.
3. The window shows the presence (or absence) of a battery, along
with its power source, voltage, charge time and remaining time to
run. To recharge the battery, click on
4. The window also shows if the backlight is on and how long the
backlight timeout is. Use the numeric keys to enter a backlight
interval in minutes from 0 to 960 (16 hours) in the text box. If you
enter 0 (zero) the backlight will turn off.
5. Click on
[Apply]
to apply the settings immediately, and on
confirm the settings and close the window. To return the window
to its previous settings, click on the
Figure 4-11: Battery/Backlight Status
March 2008
[Full Charge]
.
[OK]
[Cancel]
button.
to
4-13