Setting Up The Data Logger - GE Moisture monitor series 3 Programming Manual

March 2008
Setting Up the Data
Logger
3-16
The MMS-3 has a data logging feature that enables you to internally
store and view data. Data is logged at user-selected time intervals and
is stored in the unit's SRAM memory or in an optional PCMCIA card.
You may choose up to twelve (12) parameters to log at a time. Since a
fixed amount of memory is assigned to data logging, the more
parameters you select and the more frequent the time interval, the
sooner the available memory will be filled. The MMS-3 has a status
screen that lists the number of records, bytes free, bytes used, and the
remaining hours and minutes the log will run before running out of
memory.
[PROG]
Press the key to enter the user program.
Enter Passcode: XXXX
Note: If you have already entered the user program, see Figure 3-2
on page 3-48 to navigate to the Logger Menu.
Programming Menu
USER [LOGGER]
You can do one of the following:
•
Indicate how to store logged data, as described in Storing Logged
Data on page 3-17.
•
Select measurements you want to log as described in Setting Up a
Log on page 3-18.
•
View logged data or the status of the log as described in Viewing
Logged Data and Status on page 3-21.
• [RUN]
Exit by pressing the
Enter the passcode
1
Use the arrow keys to move the
brackets to LOGGER and press
[YES]
.
key.
Advanced Programming
.