Changing Alarm Settings - GE Moisture monitor series 3 Programming Manual

March 2008

Changing Alarm Settings

4-4
PanaView enables you to set or change alarm settings for the
MMS-3. You can determine which sensor and unit serve as the alarm,
the trip and deadband values, and the alarm's reaction to errors.
1. From the "New Meter Browser" option, pull down the desired
meter, and click on the desired channel.
2. From the channel menu, click on the Alarms option, and then on
"Alarm A" or "Alarm B." The Alarm window appears, as shown in
Figure 4-3 below.
Figure 4-3: Alarm Programming Window
3. To set the alarm sensor and unit
a. Pull down the "Sensor" list box in the lower part of the
window.
b. Then click on the desired sensor type.
c. A list of units appears. Click on the desired unit.
4. To set the alarm type, click on the
buttons, as desired.
[Trip Above] [Trip Below]
or
Programming with PanaView
radio