Checking The Battery Status - GE Moisture monitor series 3 Programming Manual

March 2008
Checking the Battery
Status
3-14
If your MMS-3 has the battery pack, you should periodically monitor
the amount of charge the battery has left, as described below.
Disconnect the AC power. Press the
program.
Enter Passcode: XXXX
Note: If you have already entered the user program, see Figure 3-3
on page 3-49 to navigate to the Test Menu.
Programming Menu
[TEST] CONTRAST
Test Menu
[BATTERY]
Battery Test
[STATUS] RdChgTime
Battery Status (v)
XX.XX Press [YES]
Run Time Left (min)
XXX
[PROG]
key to enter the user
Enter the passcode
1 Use the arrow keys to move the
brackets to TEST and press
1
Use the arrow keys to move the
brackets to BATTERY and press
[YES]
.
Use the arrow keys to move the
brackets to STATUS and press
[YES]
.
The MMS-3 alternates two
displays showing the battery
voltage and how much longer the
battery will operate (in minutes).
Advanced Programming
.
[YES]
.