Viewing Or Setting The Clock And Calendar - GE Moisture monitor series 3 Programming Manual

Viewing or Setting the
Clock and Calendar
Basic Programming
Use the steps below to view or set the clock and calendar.
[PROG]
Press the key to enter the user program.
Enter Passcode: XXXX
Note: If you have already entered the user program, refer to the
menu maps at the end of Chapter 3 to navigate to the CLOCK
Menu.
Programming Menu
BACKLIGHT [CLK]
Clock Menu
[SHOW] SET
If you select SHOW:
Clock Menu
12:14 06/01/1997
If you select SET:
Use the arrow keys to move the cursor, and then enter the correct
information. The cursor automatically jumps to the next position.
When you are done making changes, press [YES] to confirm your
entry. Then press [NO] to leave the CLOCK Menu and return to the
Programming Menu.
You may now do one of the following:
•
Refer to another section and perform a different procedure. Refer
to the menu maps at the end of Chapter 3 to navigate through the
user program.
Exit by pressing the [RUN] key.
•
Enter the passcode
1 Use the arrow keys to move the
brackets to CLOCK and press
[YES].
1
Use the arrow keys to move the
brackets to the desired selection
and press [YES].
1 The time and date appear. Press
[YES] to return to the
Programming Menu.
March 2008
.
2-7