Accessing System Information - GE Moisture monitor series 3 Programming Manual

March 2008
Accessing System
Information
2-8
If you need to confirm the system information on your particular
MMS-3 unit, the user program includes a menu, SysInfo, that supplies
the serial number, run time and boot device for your meter.
Press the [PROG] key to enter the user program.
Enter Passcode: XXXX
Note: If you have already entered the user program, refer to the
menu maps at the end of Chapter 3 to navigate to the SysInfo
Menu.
Programming Menu
[SysInfo]
System Information
[PROGRAM] UpTime
If you select PROGRAM:
Code:MMS3.STD.003C
Mfg. 9/21/00
If you select UpTime:
Up Time; 0 Days
5 Hrs 36 Min
If you select BootDevice:
Boot device is
Flash
.
Enter the passcode
1
Use the arrow keys to move the
brackets to SysInfo and press
[YES].
Use the arrow keys to move the
brackets to the desired selection
[YES]
and press .
The program code and
manufacturing date appear,
followed by the serial number
and PCI number. The program
then returns to the SysInfo menu.
The screen briefly displays the
time the MMS-3 has run since it
was turned on, and then returns
to the SysInfo menu.
The screen briefly displays the
type of boot device installed, and
then returns to the SysInfo menu.
Basic Programming