Calls
Procedure
Step 1
Press Intercom to switch to connected mode. In connected mode, you can speak to the intercom caller.
Step 2
Press Intercom to end the call.
Supervise and Record Calls
You can supervise and record a call. But you must have a minimum of three people on a line: the person
calling, the chaperone, and the person called.
The chaperone answers a call, creates a conference call, and monitors and records the conversation.
The chaperone performs the following tasks:
• Record the call.
• Conference in the first participant only; Other participants add people as needed.
• End the call.
The conference ends when the chaperone hangs up the call.
Set up a Supervised Call
Procedure
Step 1
Answer an incoming call.
Record displays if the system determines that the call must be chaperoned and recorded.
Step 2
Press Conference
Step 3
Enter the phone number for the supervisor and press Call.
Step 4
Press Conference when the supervisor answers.
Step 5
Press End Call to end the call.
Record a Call
You can record a call. You might hear a notification tone as you record the call.
Procedure
Press Record to start or stop recording.
to create a conference call.
Supervise and Record Calls
Cisco IP Phone 7800 Series User Guide
33