Makita LS1016 Technical Information page 8

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Blade case, Motor section (cont.)
DISASSEMBLING
(3) Motor section can be disassembled from Blade case as illustrated in Figs. 13 and 14.
Fig. 13
1. Remove Carbon brushes from
Motor housing.
Fig. 14
Remove M6x80 Pan head screw (4pcs). Motor housing,
Motor bracket and Handle section can be separated from
Blade case.
M6x80 Pan head screw (4pcs.)
Handle section
ASSEMBLING
(1) Make the drum portion of Rod 16 smooth by filing and applying grease.
Fig. 15
Rod 16 removed in Fig.11 has burr
at the point on which Hex socket head
set bolt puts pressure.
2. Remove 4x18 Tapping screw,
Motor housing
Motor bracket
Before assembling, remove burr by scraping with file,
and apply grease to the drum portion for smooth assembling
Rod 16 into Sleeve 17.
3. Disconnect connectors of Laser
circuit from that of Power supply
circuit.
Blade case
Lead cover holder and Lead
cover.
Lead cover holder
4x18 Tapping screw
Remove Handle cover by unscrewing
6x18 Tapping screw (6pcs.). The electrical
parts in Handle can be replaced.
6x18 Tapping screw (6pcs.)
Handle cover
P 8/ 37
Lead cover
Motor housing