Makita LS1016 Technical Information page 13

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Gear section (Spiral bevel gear 32, Helical gear 14, Helical gear 27, Helical gear 28)
(cont.)
ASSEMBLING
(3) Assemble Helical gear 14 to Bearing box as illustrated in Fig. 28.
(4) After mounting Grease holder, set Spiral bevel gear 32 to the shaft of Helical gear 14 as illustrated in Fig. 29.
Fig. 28
Pressfit Ball bearing 608DDW to Bearing box.
Tighten provisionally Bearing retainer 14-23.
Ball bearing 608DDW
Bearing retainer 14-23
Fig. 29
Tighten Grease holder
with 4x12 Tapping screws.
4x12 Tapping screw (2pcs.)
Spindle
While fixing Woodruff key 4 by finger, align the notch of Spiral bevel
gear to the Woodruff key and push down the Gear.
Spiral bevel gear 32 can be assembled to the shaft of Helical gear 14.
Spiral bevel gear 32
Grease
holder
Woodruff key 4
Assemble Helical gear 14 with 1R045 and R346.
1R045
1R346
Helical gear 14
P 13/ 37
Helical gear 28
Helical gear 27