Makita LS1016 Technical Information page 17

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-5. Turn Base, Base
DISASSEMBLING
(1) Remove the parts from Turn base and Base as illustrated in Fig. 37.
(2) Removing M8x45 Hex bolt, separate Turn base section from Base as illustrated in Fig. 38.
Fig. 37
1. Remove Upper fence, Lower
fence, Guide fence and Kerf
board.
Lever 45 (2pcs.)
Upper fence (2pcs.)
Lower fence (2pcs.)
Guide fence
Fig. 38
Remove M8x45 Hex bolt with
Socket wrench 13.
And remove Flat washer 8.
M8x45 Hex bolt
Flat washer 8
ASSEMBLING
Assemble Turn base section as illustrated in Fig. 39. And then, take the disassembling step in reverse. Refer to Fig. 37.
Fig. 39
Apply Grease to Slide plate and the center hole
of Base before assembling Turn base section.
Slide plate
2. Turning Grip 50 clockwise at
90 degrees, move Turn base to
the direction designated with
black arrow until it stops.
Kerf board
Grip 50
Turn base
section
Base
Turn base section has to be tightened with M8x45 Hex bolt
so that it can smoothly turn without wobbling.
Base
3. Remove Miter scale plate from Base by
unscrewing 4x12 Tapping screw (3pcs.)
Miter scale plate
While pressing down Lock
lever, remove Turn base
section from Base.
M8x45 Hex bolt
Flat washer 8
While pressing down Lock
lever, fit Turn base section
to Base.
P 17/ 37
Lock lever
Lock lever