Makita LS1016 Technical Information page 33

W
iring diagram
Fig. D-2A
Wiring in Motor Housing and Handle for Argentina and
220 - 240V area where Radio interference suppression is required.
Field lead wires have to be tightened
in the Motor housing so as not to
touch Armature.
Field lead wire (white)
Field lead wire (purple)
Do not route Field lead wires
(white and purple) between
Armature and Baffle plate.
Pass the Lead wires from Motor
housing through this notch of
Handle.
Terminal
block
Field lead wires
* (orange)
* (black)
* (yellow)
Pass Lead wires through ribs as
illustrated.
Do not put Lead wires on ribs.
The Receptacles have to
be connected so that their
wire connecting portions
face the bottom of Handle.
Controller
rib for Laser
case of Power
switch unit
supply circuit
Connection of Receptacles
Receptacles
Bottom of Handle Wire connecting portion
P 33/ 37
rib
Switch for protection
of brake coil