Makita LS1016 Technical Information page 12

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Gear section (Spiral bevel gear 32, Helical gear 14, Helical gear 27, Helical gear 28)
(cont.)
DISASSEMBLING
(6) Helical gear 28 and Spindle can be disassembled as illustrated in Figs. 25.
Fig. 25
Disassemble Ball bearing 608DDW with 1R269. And remove
Retaining ring S-15 from Spindle with 1R291.
1R269
Ball bearing
608DDW
Bearing box
ASSEMBLING
(1) Assemble Helical gear 28 section to Bearing box as illustrated in Fig. 26. And then, assemble Retaining ring S-15
and Ball bearing 608DDW to Spindle. Refer to Fig. 25.
(2) Assemble Helical gear 27 section to Bearing box as illustrated in Fig. 27.
Fig. 26
Ball bearing
6002DDW
Fig. 27
Assemble Helical gear 27, Ball bearing 6000ZZ and Steel ball 4 to Gear shaft.
And then, assemble the Helical gear 27 section to Bearing box.
Convex side
The convex side has
to be faced to Gear shaft
end on which Steel ball 4
is mounted.
1R291
Retaining
ring S-15
Spindle
1R232
Spindle
Bearing box
Steel ball 4
Gear shaft
Helical
gear 27
Ball bearing
6000DDW
Receiving Ball bearing 6002DDW with
the table of Arbor press, press down
Spindle with Arbor press.
Ball bearing
6002DDW
Helical gear 28
Rim portion has
to be faced to
Bearing box side.
1R036
Helical
gear 28
P 12/ 37
Helical gear 28
Spindle