Makita LS1016 Technical Information page 11

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Gear section (Spiral bevel gear 32, Helical gear 14, Helical gear 27, Helical gear 28)
(cont.)
DISASSEMBLING
(4) Spiral bevel gear 32 and Helical gear 14 can be disassembled as illustrated in Figs. 22 and 23.
Fig. 22
Rubber
washer 12
Woodruff
key 4
Fig. 23
1R045
1R346
Shaft of
Helical gear 14
(5) Helical gear 27 and Gear shaft can be disassembled as illustrated in Fig. 24.
Fig. 24
Disassemble Helical gear 27 from Bearing box.
Remove Ball bearing 6000ZZ from Gear shaft with 1R269.
And then, take out Steel ball 4 from the Gear shaft.
Helical gear 27
Bearing box
1. Remove Ball bearing 608DDW with
1R269 from the shaft of Helical gear 14.
2. Remove Retaining ring S-12 with
1R291 from the shaft of Helical gear 14.
Flat washer 12
Spiral bevel gear 32
Ball bearing
608DDW
Helical gear 14
1R269
Ball bearing
6000ZZ
Unscrew 4x12 Tapping screws and remove
Grease holder from Bearing box.
Grease
holder
Ball bearing 608DDW can be
removed by pressing from Grease
holder side to Bearing retainer side.
Ball bearing 608DDW
Putting the Helical gear 27 on 1R217,
remove Gear shaft by pressing with
arbor press.
Steel ball 4
P 11/ 37
4x12
Tapping screw
Helical gear 27
Gear shaft
1R217